Change-Windows-Desktop-Background-Using-Group-Policy_10.png

Change Windows Desktop Background Using Group Policy

Group Policy is the center of administration for Microsoft Active Directory (AD) domain service. Administrator can set up specific configuration and policy and enforced them on the targeted users or computers that are member of the domain structure. One of the common practices in an organization or company is using Group Policy is to push […]
Disable-Control-Panel-Access-using-Group-Policy-on-Windows_0.png

Disable Control Panel Access using Group Policy on Windows

The reason why we might want to disable access to control panel on a Windows computer or server is to minimize the risk of exposing the computer settings to anyone. As we all know, in control panel we can find almost every configuration and settings on our computer; such as User Accounts, System and Security, […]
configure-glbp-in-cisco-ios-router.png

Configure GLBP in Cisco IOS Router

Improvement at the gateway level is now more than just about redundancy as we can use Cisco’s sophisticated feature called GLBP or Gateway Load Balancing Protocol. Just by looking at the name, we can easily guess its superior value compared to HSRP or VRRP. In HSRP or VRRP, only the active/master router that do the […]
Configure-VRRP-in-Cisco-IOS-Router.png

Configure VRRP in Cisco IOS Router

VRRP or Virtual Router Redundancy Protocol is the open standard version of Cisco’s HSRP. It is also used to provide redundancy of a gateway by using multiple routers, but since it’s an open standard then it can be implemented using routers from vendors other than Cisco. Most of VRRP logic are very similar to HSRP, […]
Configure-HSRP-in-Cisco-IOS-Router.png

Configure HSRP in Cisco IOS Router

HSRP or Hot-Standby Routing Protocol is a mechanism developed by Cisco to add redundancy at the gateway of a subnet. The idea of HSRP is using multiple routers to serve as a gateway using one virtual IP address. One of the routers will be designated as the active gateway, and if it’s become unreachable there […]
Understanding-Cisco-IOS-Command-Line-Modes-Flowchart.png

Understanding Cisco IOS Command Line Modes

Cisco Command Line Interface (CLI) is the main interface where we will interact with Cisco IOS devices. CLI is accessible directly via console cable or remotely via methods such as Telnet/SSH. From here, we can do things such as monitoring device status or changing configuration. Cisco has divided its CLI into several different modes. Understanding […]
Managing-User-Accounts-and-Password-in-Cisco-IOS-devices-login-privilege.png

Manage User Accounts and Passwords in Cisco IOS Devices

Managing user Accounts and passwords in Cisco IOS Devices is very important task. With several different user accounts, you can also set different privilege level for each one of them. Different privilege means different available commands that can be executed per user account. In this article, we will go deep on creating users accounts and all […]
Page 1 of 212